If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. 


Thread Tools  Display Modes 
#1




Adding extra criteria
Hi, I've got the following formula & need to add an IF(AND "Draw", "Sub (Used
+80)". =IF(AND($F$7="Win",F16="Started"),VLOOKUP(B16,Shee t1!$A$3:$L$31,5,FALSE),IF(AND($F$7="Win",F16="Sub (Not Used)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,7,FALSE),IF( AND($F$7="Win",F16="Sub (Used 80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,6,FALSE),IF(AN D($F$7="Win",F16="Sub (Used +80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,6,FALSE),IF(A ND($F$7="Draw",F16="Sub (Used 80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,10,FALSE),IF(A ND($F$7="Draw",F16="Sub (Not Used)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,11,FALSE),IF (AND($F$7="Draw",F16="Started"),VLOOKUP(B16,Sheet1 !$A$3:$L$31,9,FALSE),"0"))))))) Now when i do add this it rejects the addition stating that there is an error. All i'm adding is the same as all the other IF(AND's that are already in there. The return amount for the amount of +80 is the same as 80. If i change the 80 to +80 it works fine but I then can't add 80? What am i missing? Thanks  EVH5150 
Ads 
#2




Adding extra criteria
Sounds like you are extracting a cell from a table based on B16 and F16 (and win vs draw)..
something along the lines of this formula, though you will need to change your headers so they are unique: Ie, you have Sub (Used80) for both Win and Draw, but they would be better changed to Win Sub (Used80) and Draw Sub (Used80) =INDEX(Sheet1!$A$3:$L$31,MATCH(B16,Sheet1!$A$3:$A$ 31,FALSE),MATCH(F16,Sheet1!$A$3:$L$3,FALSE)) HTH, Bernie MS Excel MVP "EVH5150" > wrote in message ... > Hi, I've got the following formula & need to add an IF(AND "Draw", "Sub (Used > +80)". > > =IF(AND($F$7="Win",F16="Started"),VLOOKUP(B16,Shee t1!$A$3:$L$31,5,FALSE),IF(AND($F$7="Win",F16="Sub > (Not > Used)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,7,FALSE),IF( AND($F$7="Win",F16="Sub > (Used > 80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,6,FALSE),IF(AN D($F$7="Win",F16="Sub > (Used > +80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,6,FALSE),IF(A ND($F$7="Draw",F16="Sub > (Used > 80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,10,FALSE),IF(A ND($F$7="Draw",F16="Sub > (Not > Used)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,11,FALSE),IF (AND($F$7="Draw",F16="Started"),VLOOKUP(B16,Sheet1 !$A$3:$L$31,9,FALSE),"0"))))))) > > Now when i do add this it rejects the addition stating that there is an > error. All i'm adding is the same as all the other IF(AND's that are already > in there. > The return amount for the amount of +80 is the same as 80. > If i change the 80 to +80 it works fine but I then can't add 80? > What am i missing? > > Thanks > >  > EVH5150 
#3




Adding extra criteria
Thanks Bernie, but unfortunately i can't really changed the headers as other
formulas are driven by them as well. Ideally i need a way to incorporate the draw +80 into this formula. I'm not sure why it's only on draw that i have this problem as in the result of a win then +80 or 80 is picked up?  EVH5150 "Bernie Deitrick" wrote: > Sounds like you are extracting a cell from a table based on B16 and F16 (and win vs draw).. > something along the lines of this formula, though you will need to change your headers so they are > unique: Ie, you have Sub (Used80) for both Win and Draw, but they would be better changed to Win > Sub (Used80) and Draw Sub (Used80) > > =INDEX(Sheet1!$A$3:$L$31,MATCH(B16,Sheet1!$A$3:$A$ 31,FALSE),MATCH(F16,Sheet1!$A$3:$L$3,FALSE)) > > HTH, > Bernie > MS Excel MVP > > > "EVH5150" > wrote in message > ... > > Hi, I've got the following formula & need to add an IF(AND "Draw", "Sub (Used > > +80)". > > > > =IF(AND($F$7="Win",F16="Started"),VLOOKUP(B16,Shee t1!$A$3:$L$31,5,FALSE),IF(AND($F$7="Win",F16="Sub > > (Not > > Used)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,7,FALSE),IF( AND($F$7="Win",F16="Sub > > (Used > > 80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,6,FALSE),IF(AN D($F$7="Win",F16="Sub > > (Used > > +80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,6,FALSE),IF(A ND($F$7="Draw",F16="Sub > > (Used > > 80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,10,FALSE),IF(A ND($F$7="Draw",F16="Sub > > (Not > > Used)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,11,FALSE),IF (AND($F$7="Draw",F16="Started"),VLOOKUP(B16,Sheet1 !$A$3:$L$31,9,FALSE),"0"))))))) > > > > Now when i do add this it rejects the addition stating that there is an > > error. All i'm adding is the same as all the other IF(AND's that are already > > in there. > > The return amount for the amount of +80 is the same as 80. > > If i change the 80 to +80 it works fine but I then can't add 80? > > What am i missing? > > > > Thanks > > > >  > > EVH5150 > > > 
#4




Adding extra criteria
You can add in an offset for the Draw basis like this (pick up four columns over) if your column
heading repeat after four columns: =INDEX(Sheet1!$A$3:$L$31,MATCH(B16,Sheet1!$A$3:$A$ 31,FALSE),IF(F7="Draw",4,0)+MATCH(F16,Sheet1!$A$3: $L$3,FALSE)) HTH, Bernie MS Excel MVP "EVH5150" > wrote in message ... > Thanks Bernie, but unfortunately i can't really changed the headers as other > formulas are driven by them as well. > > Ideally i need a way to incorporate the draw +80 into this formula. I'm not > sure why it's only on draw that i have this problem as in the result of a win > then +80 or 80 is picked up? > >  > EVH5150 > > > "Bernie Deitrick" wrote: > >> Sounds like you are extracting a cell from a table based on B16 and F16 (and win vs draw).. >> something along the lines of this formula, though you will need to change your headers so they >> are >> unique: Ie, you have Sub (Used80) for both Win and Draw, but they would be better changed to Win >> Sub (Used80) and Draw Sub (Used80) >> >> =INDEX(Sheet1!$A$3:$L$31,MATCH(B16,Sheet1!$A$3:$A$ 31,FALSE),MATCH(F16,Sheet1!$A$3:$L$3,FALSE)) >> >> HTH, >> Bernie >> MS Excel MVP >> >> >> "EVH5150" > wrote in message >> ... >> > Hi, I've got the following formula & need to add an IF(AND "Draw", "Sub (Used >> > +80)". >> > >> > =IF(AND($F$7="Win",F16="Started"),VLOOKUP(B16,Shee t1!$A$3:$L$31,5,FALSE),IF(AND($F$7="Win",F16="Sub >> > (Not >> > Used)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,7,FALSE),IF( AND($F$7="Win",F16="Sub >> > (Used >> > 80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,6,FALSE),IF(AN D($F$7="Win",F16="Sub >> > (Used >> > +80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,6,FALSE),IF(A ND($F$7="Draw",F16="Sub >> > (Used >> > 80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,10,FALSE),IF(A ND($F$7="Draw",F16="Sub >> > (Not >> > Used)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,11,FALSE),IF (AND($F$7="Draw",F16="Started"),VLOOKUP(B16,Sheet1 !$A$3:$L$31,9,FALSE),"0"))))))) >> > >> > Now when i do add this it rejects the addition stating that there is an >> > error. All i'm adding is the same as all the other IF(AND's that are already >> > in there. >> > The return amount for the amount of +80 is the same as 80. >> > If i change the 80 to +80 it works fine but I then can't add 80? >> > What am i missing? >> > >> > Thanks >> > >> >  >> > EVH5150 >> >> >> 
#5




Adding extra criteria
Thanks for the help, In the end i actually added Left,f16,6 to pick up "Sub
(U" seeing as it's either going to be Sub (Used +80 or 80) & the other Sub is (Not Used) then I only need to read the first 6 letters. Thanks  EVH5150 "Bernie Deitrick" wrote: > You can add in an offset for the Draw basis like this (pick up four columns over) if your column > heading repeat after four columns: > > =INDEX(Sheet1!$A$3:$L$31,MATCH(B16,Sheet1!$A$3:$A$ 31,FALSE),IF(F7="Draw",4,0)+MATCH(F16,Sheet1!$A$3: $L$3,FALSE)) > > HTH, > Bernie > MS Excel MVP > > > "EVH5150" > wrote in message > ... > > Thanks Bernie, but unfortunately i can't really changed the headers as other > > formulas are driven by them as well. > > > > Ideally i need a way to incorporate the draw +80 into this formula. I'm not > > sure why it's only on draw that i have this problem as in the result of a win > > then +80 or 80 is picked up? > > > >  > > EVH5150 > > > > > > "Bernie Deitrick" wrote: > > > >> Sounds like you are extracting a cell from a table based on B16 and F16 (and win vs draw).. > >> something along the lines of this formula, though you will need to change your headers so they > >> are > >> unique: Ie, you have Sub (Used80) for both Win and Draw, but they would be better changed to Win > >> Sub (Used80) and Draw Sub (Used80) > >> > >> =INDEX(Sheet1!$A$3:$L$31,MATCH(B16,Sheet1!$A$3:$A$ 31,FALSE),MATCH(F16,Sheet1!$A$3:$L$3,FALSE)) > >> > >> HTH, > >> Bernie > >> MS Excel MVP > >> > >> > >> "EVH5150" > wrote in message > >> ... > >> > Hi, I've got the following formula & need to add an IF(AND "Draw", "Sub (Used > >> > +80)". > >> > > >> > =IF(AND($F$7="Win",F16="Started"),VLOOKUP(B16,Shee t1!$A$3:$L$31,5,FALSE),IF(AND($F$7="Win",F16="Sub > >> > (Not > >> > Used)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,7,FALSE),IF( AND($F$7="Win",F16="Sub > >> > (Used > >> > 80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,6,FALSE),IF(AN D($F$7="Win",F16="Sub > >> > (Used > >> > +80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,6,FALSE),IF(A ND($F$7="Draw",F16="Sub > >> > (Used > >> > 80)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,10,FALSE),IF(A ND($F$7="Draw",F16="Sub > >> > (Not > >> > Used)"),VLOOKUP(B16,Sheet1!$A$3:$L$31,11,FALSE),IF (AND($F$7="Draw",F16="Started"),VLOOKUP(B16,Sheet1 !$A$3:$L$31,9,FALSE),"0"))))))) > >> > > >> > Now when i do add this it rejects the addition stating that there is an > >> > error. All i'm adding is the same as all the other IF(AND's that are already > >> > in there. > >> > The return amount for the amount of +80 is the same as 80. > >> > If i change the 80 to +80 it works fine but I then can't add 80? > >> > What am i missing? > >> > > >> > Thanks > >> > > >> >  > >> > EVH5150 > >> > >> > >> > > > 
Thread Tools  
Display Modes  


Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Adding extra data to a chart  Tracey  Charts and Charting in Excel  1  June 9th 08 10:58 PM 
Adding an extra row after every existing row  Josh W  Excel Discussion (Misc queries)  10  April 14th 08 09:56 PM 
Adding and Removing Extra Pages  Marcus Feldmore  Excel Discussion (Misc queries)  1  January 23rd 08 06:42 PM 
tab delimited adding extra tabs  maryj  Excel Discussion (Misc queries)  0  April 18th 07 07:50 PM 
adding extra digits to columns  Muhammed Rafeek M  Excel Discussion (Misc queries)  0  August 21st 06 10:35 AM 