If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. 


Thread Tools  Display Modes 
#1




How do I subtract time where hh:mm:ss:ff (frames = 30 frames/sec)
I've got a template I'm using (in Excel 2003) where I need to subtract two
timebased fields from one another. (Seems simple enough). However... this is for use @ a small post production co., where the smallest unit of measure is not actually the more commonly referenced 'second', but rather  the 'frame' (generally at the rate of 24 or 30 frames per second). What I'd like to accomplish is this: a formula that takes the two timecodes and subtracts in from out... leaving me with a duration: EX: 01:11:27.03  01:11:23.20 = 00:00:03.13 (or 3 sec & 13 frames) thanks for your help. ~kj 
Ads 
#2




How do I subtract time where hh:mm:ss:ff (frames = 30 frames/sec)
This is based upon 30 frames per second (Digital video)
In A1 and A2 we enter as text: 01:11:27:03 01:11:23:20 In B1 and B2 we enter: =LEFT(A1,2)/24+MID(A1,4,2)/(24*60)+MID(A1,7,2)/(24*60*60)+RIGHT(A1,2)/(30*60*60*24) =LEFT(A2,2)/24+MID(A2,4,2)/(24*60)+MID(A2,7,2)/(24*60*60)+RIGHT(A2,2)/(30*60*60*24) and format as Custom hh:mm:ss.00 to display: 01:11:27.10 01:11:23.67 the tenth of a second because 3 frames is a tenth of a second. In B3 enter: =B1B2 to display 00:00:03.43 in the same format. Finally to convert the ..43 seconds into frames, in B4 enter: =TEXT(B3,"hh:mm:ss") &":" & TEXT((B3*24*60*60INT(B3*24*60*60))*30,"00") to display: 00:00:03:13  Gary''s Student  gsnu200734 "KJ7" wrote: > I've got a template I'm using (in Excel 2003) where I need to subtract two > timebased fields from one another. (Seems simple enough). However... this is > for use @ a small post production co., where the smallest unit of measure is > not actually the more commonly referenced 'second', but rather  the 'frame' > (generally at the rate of 24 or 30 frames per second). > > What I'd like to accomplish is this: a formula that takes the two timecodes > and subtracts in from out... leaving me with a duration: > > EX: 01:11:27.03  01:11:23.20 = 00:00:03.13 (or 3 sec & 13 frames) > thanks for your help. > ~kj > > > > 
#3




How do I subtract time where hh:mm:ss:ff (frames = 30 frames/sec)
Followup to my previous problem, since I forgot to think about the issue of
dropframe vs. nondrop frame timecode. Dropframe time code (primarily used in film projects shot at 24fps) actually drops 2 frames per second every minute except on minutes ending in zero (in order to remain in sync). So  it actually ends up being 23.97 fps. Anyone out there got the math for Excel 2003 to help me out with that? Here's where I'm at so far: I've got a cell (C13)marked DROP FRAME validated to be True/false, and H13 is Frame Rate in fps(ex: 24, 30, etc) and G21 is the TC in ... so I'm hoping that I can set something up where =if(C13,(text(G21,"hh:mm:ss")&":"&TEXT((G21)*24*60 *60INT(G21*24*60*60))*H13",00))), (INSERT DFTC FORMULA HERE )) Hidden Columns B&D starting @ row 21: where Columns A & C are TC In & Out: =LEFT(A21,2)/24+MID(A21,4,2)/(24*60)+MID(A21,7,2)/(24*60*60)+RIGHT(A21,2)/(H13*60*60*24) =LEFT(C21,2)/24+MID(C21,4,2)/(24*60)+MID(C21,7,2)/(24*60*60)+RIGHT(C21,2)/(H13*60*60*24) Hidden Column G  starting @ Row 21: =D21B21 Thanks Again!! Best ~ KJ7 "KJ7" wrote: > I've got a template I'm using (in Excel 2003) where I need to subtract two > timebased fields from one another. (Seems simple enough). However... this is > for use @ a small post production co., where the smallest unit of measure is > not actually the more commonly referenced 'second', but rather  the 'frame' > (generally at the rate of 24 or 30 frames per second). > > What I'd like to accomplish is this: a formula that takes the two timecodes > and subtracts in from out... leaving me with a duration: > > EX: 01:11:27.03  01:11:23.20 = 00:00:03.13 (or 3 sec & 13 frames) > thanks for your help. > ~kj > > > > 
#4




How do I subtract time where hh:mm:ss:ff (frames = 30 frames/s
this is helpfull.... pls i need one but in (frames = 25 frames/s
ty > This is based upon 30 frames per second (Digital video) > > In A1 and A2 we enter as text: > > 01:11:27:03 > 01:11:23:20 > > In B1 and B2 we enter: > > =LEFT(A1,2)/24+MID(A1,4,2)/(24*60)+MID(A1,7,2)/(24*60*60)+RIGHT(A1,2)/(30*60*60*24) > =LEFT(A2,2)/24+MID(A2,4,2)/(24*60)+MID(A2,7,2)/(24*60*60)+RIGHT(A2,2)/(30*60*60*24) > > and format as Custom hh:mm:ss.00 to display: > > 01:11:27.10 > 01:11:23.67 > > the tenth of a second because 3 frames is a tenth of a second. In B3 enter: > > =B1B2 to display 00:00:03.43 in the same format. Finally to convert the > .43 seconds into frames, in B4 enter: > > =TEXT(B3,"hh:mm:ss") &":" & TEXT((B3*24*60*60INT(B3*24*60*60))*30,"00") > to display: > 00:00:03:13 > >  > Gary''s Student  gsnu200734 > > > "KJ7" wrote: > > > I've got a template I'm using (in Excel 2003) where I need to subtract two > > timebased fields from one another. (Seems simple enough). However... this is > > for use @ a small post production co., where the smallest unit of measure is > > not actually the more commonly referenced 'second', but rather  the 'frame' > > (generally at the rate of 24 or 30 frames per second). > > > > What I'd like to accomplish is this: a formula that takes the two timecodes > > and subtracts in from out... leaving me with a duration: > > > > EX: 01:11:27.03  01:11:23.20 = 00:00:03.13 (or 3 sec & 13 frames) > > thanks for your help. > > ~kj > > > > > > > > 
#5




How do I subtract time where hh:mm:ss:ff (frames = 30 frames/s
hi! please convert this to > 25 frames per second (pal video) ty
"Gary''s Student" wrote: > This is based upon 30 frames per second (Digital video) > > In A1 and A2 we enter as text: > > 01:11:27:03 > 01:11:23:20 > > In B1 and B2 we enter: > > =LEFT(A1,2)/24+MID(A1,4,2)/(24*60)+MID(A1,7,2)/(24*60*60)+RIGHT(A1,2)/(30*60*60*24) > =LEFT(A2,2)/24+MID(A2,4,2)/(24*60)+MID(A2,7,2)/(24*60*60)+RIGHT(A2,2)/(30*60*60*24) > > and format as Custom hh:mm:ss.00 to display: > > 01:11:27.10 > 01:11:23.67 > > the tenth of a second because 3 frames is a tenth of a second. In B3 enter: > > =B1B2 to display 00:00:03.43 in the same format. Finally to convert the > .43 seconds into frames, in B4 enter: > > =TEXT(B3,"hh:mm:ss") &":" & TEXT((B3*24*60*60INT(B3*24*60*60))*30,"00") > to display: > 00:00:03:13 > >  > Gary''s Student  gsnu200734 > > > > 
#6




How do I subtract time where hh:mm:ss:ff (frames = 30 frames/s
Well you could look at the formula and work out what it is doing (as all the
functions arte standard Excel functions which are clearly explained in Excel help), or at the very least you could look at where 30 appears in the formula and wonder whether you could sensibly replace the 30 by 25 to meet your needs. And of course you'll test it, as you would with any other formula which is suggested to you.  David Biddulph "Gervin Callo" > wrote in message ... > hi! please convert this to > 25 frames per second (pal video) ty > > "Gary''s Student" wrote: > >> This is based upon 30 frames per second (Digital video) >> >> In A1 and A2 we enter as text: >> >> 01:11:27:03 >> 01:11:23:20 >> >> In B1 and B2 we enter: >> >> =LEFT(A1,2)/24+MID(A1,4,2)/(24*60)+MID(A1,7,2)/(24*60*60)+RIGHT(A1,2)/(30*60*60*24) >> =LEFT(A2,2)/24+MID(A2,4,2)/(24*60)+MID(A2,7,2)/(24*60*60)+RIGHT(A2,2)/(30*60*60*24) >> >> and format as Custom hh:mm:ss.00 to display: >> >> 01:11:27.10 >> 01:11:23.67 >> >> the tenth of a second because 3 frames is a tenth of a second. In B3 >> enter: >> >> =B1B2 to display 00:00:03.43 in the same format. Finally to convert the >> .43 seconds into frames, in B4 enter: >> >> =TEXT(B3,"hh:mm:ss") &":" & TEXT((B3*24*60*60INT(B3*24*60*60))*30,"00") >> to display: >> 00:00:03:13 >> >>  >> Gary''s Student  gsnu200734 >> >> >> > 
#7




How do I subtract time where hh:mm:ss:ff (frames = 30 frames/s
This works great!
I found one little glitch. Not sure how to fix it. When the duration of a clip is an even second, for example a clip that is exactly two seconds long, the results are displayed as: 00:00:01:30 Which is equivalent to two seconds, just like writing two halves equals one. But it would be more clear if it was displayed as: 00:00:02:00. Again not sure what the best way to fix that is, just thought I'd raise it. "Gary''s Student" wrote: > This is based upon 30 frames per second (Digital video) > > In A1 and A2 we enter as text: > > 01:11:27:03 > 01:11:23:20 > > In B1 and B2 we enter: > > =LEFT(A1,2)/24+MID(A1,4,2)/(24*60)+MID(A1,7,2)/(24*60*60)+RIGHT(A1,2)/(30*60*60*24) > =LEFT(A2,2)/24+MID(A2,4,2)/(24*60)+MID(A2,7,2)/(24*60*60)+RIGHT(A2,2)/(30*60*60*24) > > and format as Custom hh:mm:ss.00 to display: > > 01:11:27.10 > 01:11:23.67 > > the tenth of a second because 3 frames is a tenth of a second. In B3 enter: > > =B1B2 to display 00:00:03.43 in the same format. Finally to convert the > .43 seconds into frames, in B4 enter: > > =TEXT(B3,"hh:mm:ss") &":" & TEXT((B3*24*60*60INT(B3*24*60*60))*30,"00") > to display: > 00:00:03:13 > >  > Gary''s Student  gsnu200734 > > > "KJ7" wrote: > > > I've got a template I'm using (in Excel 2003) where I need to subtract two > > timebased fields from one another. (Seems simple enough). However... this is > > for use @ a small post production co., where the smallest unit of measure is > > not actually the more commonly referenced 'second', but rather  the 'frame' > > (generally at the rate of 24 or 30 frames per second). > > > > What I'd like to accomplish is this: a formula that takes the two timecodes > > and subtracts in from out... leaving me with a duration: > > > > EX: 01:11:27.03  01:11:23.20 = 00:00:03.13 (or 3 sec & 13 frames) > > thanks for your help. > > ~kj > > > > > > > > 
#8




How do I subtract time where hh:mm:ss:ff (frames = 30 frames/s
I used these formuls to create another type of form. What I call a rundown.
What it is, is a sheet to help you calculate segment lengths for a video or film project of a specific length. So you enter the duration of parts of the program and it keeps a running total of how long the project is and how much remains to fill. Example, you want to produce a 30 minute magazine style show. Segment 1 is one story, Segment 2 is an interview etc etc... What I've done is used these formulas to convert the hh:mm:ss:ff timecode values into seconds and convert them back once I've added or subtracted the values as needed to tell me how much time has been used up and how much time is left. What I noticed is that when I enter the length of the first segment, if the timecode has a frame value of 15 or higher, the formula seems to add a second to the time. Ex: My title sequence for a show might be 00:00:45:22 but when it gets converted into hh:mm:ss.00 and then back into hh:mm:ss:ff the time becomes 00:00:46:22 This seems to happen even if I don;t do any other operations to the values other than the conversion. Any ideas? > This works great! > > I found one little glitch. Not sure how to fix it. > > When the duration of a clip is an even second, for example a clip that is > exactly two seconds long, the results are displayed as: 00:00:01:30 > > Which is equivalent to two seconds, just like writing two halves equals one. > But it would be more clear if it was displayed as: 00:00:02:00. > > Again not sure what the best way to fix that is, just thought I'd raise it. > > > "Gary''s Student" wrote: > > > This is based upon 30 frames per second (Digital video) > > > > In A1 and A2 we enter as text: > > > > 01:11:27:03 > > 01:11:23:20 > > > > In B1 and B2 we enter: > > > > =LEFT(A1,2)/24+MID(A1,4,2)/(24*60)+MID(A1,7,2)/(24*60*60)+RIGHT(A1,2)/(30*60*60*24) > > =LEFT(A2,2)/24+MID(A2,4,2)/(24*60)+MID(A2,7,2)/(24*60*60)+RIGHT(A2,2)/(30*60*60*24) > > > > and format as Custom hh:mm:ss.00 to display: > > > > 01:11:27.10 > > 01:11:23.67 > > > > the tenth of a second because 3 frames is a tenth of a second. In B3 enter: > > > > =B1B2 to display 00:00:03.43 in the same format. Finally to convert the > > .43 seconds into frames, in B4 enter: > > > > =TEXT(B3,"hh:mm:ss") &":" & TEXT((B3*24*60*60INT(B3*24*60*60))*30,"00") > > to display: > > 00:00:03:13 > > > >  > > Gary''s Student  gsnu200734 > > > > > > "KJ7" wrote: > > > > > I've got a template I'm using (in Excel 2003) where I need to subtract two > > > timebased fields from one another. (Seems simple enough). However... this is > > > for use @ a small post production co., where the smallest unit of measure is > > > not actually the more commonly referenced 'second', but rather  the 'frame' > > > (generally at the rate of 24 or 30 frames per second). > > > > > > What I'd like to accomplish is this: a formula that takes the two timecodes > > > and subtracts in from out... leaving me with a duration: > > > > > > EX: 01:11:27.03  01:11:23.20 = 00:00:03.13 (or 3 sec & 13 frames) > > > thanks for your help. > > > ~kj > > > > > > > > > > > > 
#9




How do I subtract time where hh:mm:ss:ff (frames = 30 frames/sec)
Hi there, do you have a template excel sheet for this?
Cameron On Thursday, July 19, 2007 at 8:04:01 PM UTC4, Gary''s Student wrote: > This is based upon 30 frames per second (Digital video) > > In A1 and A2 we enter as text: > > 01:11:27:03 > 01:11:23:20 > > In B1 and B2 we enter: > > =LEFT(A1,2)/24+MID(A1,4,2)/(24*60)+MID(A1,7,2)/(24*60*60)+RIGHT(A1,2)/(30*60*60*24) > =LEFT(A2,2)/24+MID(A2,4,2)/(24*60)+MID(A2,7,2)/(24*60*60)+RIGHT(A2,2)/(30*60*60*24) > > and format as Custom hh:mm:ss.00 to display: > > 01:11:27.10 > 01:11:23.67 > > the tenth of a second because 3 frames is a tenth of a second. In B3 enter: > > =B1B2 to display 00:00:03.43 in the same format. Finally to convert the > .43 seconds into frames, in B4 enter: > > =TEXT(B3,"hh:mm:ss") &":" & TEXT((B3*24*60*60INT(B3*24*60*60))*30,"00") > to display: > 00:00:03:13 > >  > Gary''s Student  gsnu200734 > > > "KJ7" wrote: > > > I've got a template I'm using (in Excel 2003) where I need to subtract two > > timebased fields from one another. (Seems simple enough). However... this is > > for use @ a small post production co., where the smallest unit of measure is > > not actually the more commonly referenced 'second', but rather  the 'frame' > > (generally at the rate of 24 or 30 frames per second). > > > > What I'd like to accomplish is this: a formula that takes the two timecodes > > and subtracts in from out... leaving me with a duration: > > > > EX: 01:11:27.03  01:11:23.20 = 00:00:03.13 (or 3 sec & 13 frames) > > thanks for your help. > > ~kj > > > > > > > > 
#10




Quote:

Thread Tools  
Display Modes  


Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
Need Help with Freezing/Splitting 2 Frames in Excel 2003  Tyn  Excel Discussion (Misc queries)  3  February 13th 07 07:19 PM 
Frames in Excel with drop down boxes.  Adam  Excel Discussion (Misc queries)  2  December 31st 06 05:53 PM 
freezing frames  Bob Griendling  Excel Worksheet Functions  4  July 1st 06 10:58 PM 
Calculation of Hrs and Mins from 2 Time Frames  Corey  Excel Worksheet Functions  6  May 31st 06 05:12 PM 
how do I add/subtract time when I'm going from PM to AM (ex. 11:4.  tammyj  Excel Worksheet Functions  1  March 15th 05 08:31 PM 